Inspection and Verification
This article provides step-by-step module configuration procedures. Carry out the PMI procedures in this article when another workshop manual article directs to carry out configuration or when DTCs from the below list are present:
DTC CHART
| DTC | Description | Source | Action |
|---|---|---|---|
| B2477 | Module Configuration Failure |
|
CARRY OUT PMI. REFER to Programmable Module Installation (PMI) . |
| B2477 | Module Configuration Failure |
|
REFER to Accessory Protocol Interface Module (APIM) Programming . |
| B2477 | Module Configuration Failure |
|
INSTALL a new HVAC module. REFER to CLIMATE CONTROL article. |
| B2477 | Module Configuration Failure |
|
INSTALL a new RCM. REFER to SUPPLEMENTAL RESTRAINT SYSTEM article. |
| P0602 | Powertrain Control Module Programming Error |
|
CARRY OUT PMI. REFER to Programmable Module Installation (PMI) . |
| P0605 | Internal Control Module Read Only Memory (ROM) Error |
|
CARRY OUT PMI. REFER to Programmable Module Installation (PMI) . |
| P1639 | Vehicle ID Block Corrupted, Not Programmed |
|
CARRY OUT PMI. REFER to Programmable Module Installation (PMI) . |
| U0300 | Internal Control Module Software Incompatibility |
|
CARRY OUT PMI. REFER to Programmable Module Installation (PMI) . |
| U0300 | Internal Control Module Software Incompatibility |
|
INSTALL a new HVAC module. REFER to CLIMATE CONTROL article. |
| U2050 | No Application Present |
|
CARRY OUT PMI. REFER to Programmable Module Installation (PMI) . |
| U2050 | No Application Present |
|
INSTALL a new ABS module. REFER to VEHICLE DYNAMIC SYSTEMS article. |
| U2050 | No Application Present |
|
REFER to Accessory Protocol Interface Module (APIM) Programming . |
| U2050 | No Application Present |
|
INSTALL a new HVAC module. REFER to CLIMATE CONTROL article. |
| U2050 | No Application Present |
|
INSTALL a new FCIM. REFER to INFORMATION AND ENTERTAINMENT SYSTEMS article. |
| U2050 | No Application Present |
|
INSTALL a new OCSM. REFER to SUPPLEMENTAL RESTRAINT SYSTEM article. |
| U2050 | No Application Present |
|
INSTALL a new RCM. REFER to SUPPLEMENTAL RESTRAINT SYSTEM article. |
| U2051 | One or More Calibration Files Missing / Corrupt |
|
CARRY OUT PMI. REFER to Programmable Module Installation (PMI) . |
| U2051 | One or More Calibration Files Missing / Corrupt |
|
INSTALL a new FCIM. REFER to INFORMATION AND ENTERTAINMENT SYSTEMS article. |
| U2051 | One or More Calibration Files Missing / Corrupt |
|
INSTALL a new HVAC module. REFER to CLIMATE CONTROL article. |
| U2051 | One or More Calibration Files Missing / Corrupt |
|
INSTALL a new OCSM. REFER to SUPPLEMENTAL RESTRAINT SYSTEM article. |
| U2051 | One or More Calibration Files Missing / Corrupt |
|
INSTALL a new RCM. REFER to SUPPLEMENTAL RESTRAINT SYSTEM article. |