Powertrain Control Module (PCM): Installation

All vehicles 

1. Install the PCM and the 2 bolts.
   • Tighten to 8 Nm (71 lb-in).
2. Connect the 3 PCM electrical connectors.

PZEV 

3. Install the air cleaner outlet pipe and the intake air resonator. For additional information, refer to INTAKE AIR DISTRIBUTION AND FILTERING article.

Non-PZEV 

4. Install the air cleaner outlet pipe and the air cleaner assembly. For additional information, refer to INTAKE AIR DISTRIBUTION AND FILTERING article.

All vehicles 

5. Restore the module configuration. Carry out the module configuration restore steps of the Programmable Module Installation procedure. For additional information, refer to MODULE CONFIGURATION article.
6. Reprogram the passive anti-theft system (PATS). Carry out the Key Programming Using Two Programmed Keys procedure. For additional information, refer to ANTI-THEFT - PASSIVE ANTI-THEFT SYSTEM (PATS) article.