Component testing procedure
WARNING: This page is about a different car, the 2009 Lincoln Navigator L, 2009 Lincoln Navigator, 2009 Ford Expedition EL, and 2009 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.
MALFUNCTION SWITCH - COMPONENT TESTING
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Turn signal | 2 and 8 | Left turn | Closed circuit |
| 3 and 8 | Right turn | Closed circuit | |
| Flash-to-pass | 6 and 8 | Pull and hold lever stalk toward steering wheel | Open circuit |
| 4 and 8 | Closed circuit | ||
| High beam/Low beam | 6 and 8 | Lever stalk in detent away from steering wheel | Closed circuit |
| 4 and 8 |