LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2008 >> Fusion S, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1421 (Cruise Control System - Speed Control) >> Diagnostic And Testing >> Speed Control >> Pinpoint Tests >> Pinpoint Test D: The Speed Control Does Not Disengage When The Clutch Is Applied >> Normal Operation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Normal Operation

WARNING: This page is about a different car, the 2009 Mercury Milan, 2009 Lincoln MKZ, and 2009 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

Vehicles equipped with a manual transaxle have an additional clutch pedal speed control deactivator switch. The PCM sends a signal through circuit CE904 (GN/VT) to the clutch pedal speed control deactivator switch. The return signal is sent to the PCM through circuit RE407 (YE/VT).

DTC P0833 sets when there is an open in the clutch pedal speed control deactivator switch circuits.

This pinpoint test is intended to diagnose the following:

scientia non olet · About LEMON Manuals