System Airflow Description - Dual Automatic Temperature Control (DATC)/Electronic Automatic Temperature Control (EATC): Floor/Defrost

When FLOOR/DEFROST is selected:

• the recirc request button is enabled. If the recirc request button is selected (indicator ON), the air inlet door actuator closes off outside air from entering the passenger compartment. If the recirc request button is not selected (indicator OFF), the air inlet door actuator admits only outside air into the passenger compartment. The recirc function may time out and the air inlet door will change to the outside air position.
• the floor/defrost/panel door directs airflow to the floor duct, the defroster duct and the side window demisters.
• blended air temperature is available.
• the A/C request button is enabled. The A/C compressor will operate automatically and the indicator will illuminate if the A/C request button is selected and the outside temperature is above approximately 6°C (43°F).
• the blower motor is ON.