| Air Conditioning |
| Service |
SPECIFICATIONS |
| Torque |
SPECIFICATIONS |
| Battery |
SPECIFICATIONS |
| Brakes |
| Bleeding Sequence |
BRAKE SYSTEM BLEEDING |
| Disc Brakes w/Torque |
SPECIFICATIONS |
| Charging |
| Generator w/Torque |
SPECIFICATIONS |
| Drive Belts |
| Adjustment |
BELT TENSIONER - MECHANICAL |
| Belt Routing |
ACCESSORY DRIVE |
| Engine Cooling |
| General Service Specifications |
SPECIFICATIONS |
| Radiator Cap Pressure |
16 psi (110 kPa) |
| Thermostat R & I |
| 4.0L SOHC |
THERMOSTAT - 4.0L SOHC |
| 4.6L (3V) |
THERMOSTAT - 4.6L (3V) |
| |
5.4L (4V) |
THERMOSTAT - 5.4L (4V) |
| Water Pump R & I |
| 4.0L SOHC |
COOLANT PUMP - 4.0L SOHC |
| 4.6L (3V) |
COOLANT PUMP - 4.6L (3V) |
| |
5.4L (4V) |
COOLANT PUMP - 5.4L (4V) |
| Engine Mechanical |
| 4.0L SOHC |
| Compression |
COMPRESSION TEST |
| Oil Pressure (minimum at 2,000 RPM, engine at normal operating temperature) |
15 psi (103 kPa) |
| Overhaul |
SPECIFICATIONS |
| Torque |
SPECIFICATIONS |
| 4.6L (3V) |
| Compression |
COMPRESSION TEST |
| Oil Pressure (minimum at 2,000 RPM, engine at normal operating temperature) |
75 psi (517 kPa) |
| Overhaul |
SPECIFICATIONS |
| Torque |
SPECIFICATIONS |
| 5.4L (4V) |
| Compression |
COMPRESSION TEST |
| Oil Pressure (minimum at 2,000 RPM, engine at normal operating temperature) |
40-60 psi (276-414 kPa) |
| Overhaul |
SPECIFICATIONS |
| Torque |
SPECIFICATIONS |
| Fluid Specifications |
See FLUIDS under MAINTENANCE tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button. |
| Flywheel/Flex Plate Torque |
| Manual Transmission |
| 4.0L SOHC |
INSTALLATION |
| 4.6L (3V) |
INSTALLATION |
| 5.4L (4V) |
INSTALLATION |
| Automatic Transmission |
| 4.0L SOHC |
INSTALLATION |
| 4.6L (3V) |
REMOVAL AND INSTALLATION |
| Fuel System |
| Fuel Filter Location |
Right rear, near fuel tank snapped in bracket. |
| Fuel Filter R & I |
REMOVAL AND INSTALLATION |
| Pressure Release Procedure |
FUEL SYSTEM PRESSURE RELEASE |
| Pressure Specification |
FUEL PRESSURE SPECIFICATIONS |
| Fuel Pressure Test Procedure |
A: No Start
STEP A10 CHECK THE FUEL PRESSURE |
| Ignition |
| Firing Order & Cylinder Identification |
| 4.0L SOHC |
FIRING ORDER & CYLINDER IDENTIFICATION |
| 4.6L (3V) |
FIRING ORDER & CYLINDER IDENTIFICATION |
| 5.4L (4V) |
FIRING ORDER & CYLINDER IDENTIFICATION |
| Ignition Coil (Cylinder Identification) |
| |
4.0L SOHC |
COIL PACK |
| |
4.6L (3V) & 5.4L (4V) |
Coil On Plug |
| Ignition Wires (Routing) |
N/A |
| Spark Plugs SEE FOOTNOTE |
| 4.0L SOHC |
| Type |
Motorcraft AGSF-24N |
| Gap |
.052-.056 In. (1.32-1.42 mm) |
| Torque |
13 Ft. Lbs. (17 N.m) |
| 4.6L (3V) |
| Type (early build - black coil boot) |
Motorcraft PZT-14F |
| Type (late build - brown coil boot) |
Motorcraft HJFS-24FP |
| Gap (early build - black coil boot) |
.04-.05 In. (1.15 +/- .13 mm) |
| Gap (late build - brown coil boot) |
.039-.043 In. (1.05 +/- .05 mm) |
| Torque (early build - black coil boot) |
25 Ft. Lbs. (34 N.m) |
| Torque (late build - brown coil boot) |
9 Ft. Lbs. (12 N.m) |
| 5.4L (4V) |
| Type |
Motorcraft AGSF-22FM1 |
| Gap |
.041-.047 In. (1.04-1.20 mm) |
| Torque |
13 Ft. Lbs. (18 N.m) |
| Starting |
| Starter w/Torque |
SPECIFICATIONS |
| Wheel Alignment |
| Adjustment Specifications |
SPECIFICATIONS |
| Torque |
SPECIFICATIONS |
| Wheel & Tire |
| Wheel Lug Nut Torque |
98 Ft. Lbs. (133 N.m) |