LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2008 >> Mustang Base, 2D Convertible, Standard >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System - General Information >> General Procedures >> Spring Lock Couplings >> Connect
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Spring Lock Couplings: Connect

    NOTE: Lubricate the tube fitting with clean engine oil.
  1. Align and push the spring lock coupling onto the tube fitting until fully seated.
    2. Fig 1: Aligning & Pushing Spring Lock Coupling Onto Tube Until You Hear A Click
    GF0030176Courtesy of FORD MOTOR CO.
  2. Pull on the coupling to make sure it is fully engaged.
  3. If equipped, install the fuel tube safety clip.
    4. Fig 2: Installing Fuel Tube Safety Clip
    GF0046471Courtesy of FORD MOTOR CO.
  4. Connect the battery ground cable. For additional information, refer to BATTERY, MOUNTING AND CABLES article.
scientia non olet · About LEMON Manuals