LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2008 >> Mustang Base, 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Automatic Transmission) >> Disassembly And Assembly Of Subassemblies >> Main Control Valve Body >> Disassembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Main Control Valve Body: Disassembly

WARNING: This page is about a different variant/trim than selected.
    NOTE: The valve body separator plate has a bonded gasket. Do not reuse. Discard the plate.
  1. Remove and discard the valve body separator plate.
    2. Fig 1: Locating Valve Body Separator Plate
    GF0015578Courtesy of FORD MOTOR CO.
  2. Remove the check balls.
    3. Fig 2: Locating Main Control Valve Body Check Balls
    GF0015579Courtesy of FORD MOTOR CO.
    NOTE: Refer to the disassembled view.
  3. Disassemble the main control valve body only if cleaning is required.
scientia non olet · About LEMON Manuals