LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2008 >> Mustang Base, 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Automatic Transmission) >> Disassembly And Assembly Of Subassemblies >> Output Shaft Ring Gear and Hub Shaft Assembly >> Assembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Output Shaft Ring Gear and Hub Shaft Assembly: Assembly

WARNING: This page is about a different variant/trim than selected.
  1. Install the output shaft ring gear onto the output shaft hub.
    1. Install the output shaft ring gear.
    2. Install the retaining ring.
    2. Fig 1: Installing Output Shaft Ring Gear Onto Output Shaft Hub
    GF0015645Courtesy of FORD MOTOR CO.
  2. Install the seal.
    3. Fig 2: Identifying Seal
    GF0015643Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals