LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2008 >> Mustang Base, 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Automatic Transmission) >> Disassembly And Assembly Of Subassemblies >> Output Shaft Ring Gear and Hub Shaft Assembly >> Disassembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Output Shaft Ring Gear and Hub Shaft Assembly: Disassembly

WARNING: This page is about a different variant/trim than selected.
Fig 1: Exploded View Of Output Shaft Ring Gear
GF0000962Courtesy of FORD MOTOR CO.
Item Part Number Description
1 7A153 Output shaft ring gear
2 7D164 Output shaft hub
3 7C122 Retaining ring
4 7D019 Output shaft hub seal
  1. Inspect the output shaft ring gear and hub shaft assembly for damage. If repair is necessary, use the following procedure.
  2. Remove the seal.
    3. Fig 2: Identifying Seal
    GF0015643Courtesy of FORD MOTOR CO.
  3. Remove the output shaft ring gear from the output shaft hub.
    1. Remove the retaining ring.
    2. Remove the output shaft ring gear.
    4. Fig 3: Identifying Output Shaft Ring Gear And Retaining Ring
    GF0015644Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals