Electronic Brake Control Module: Service and Repair

Anti-Lock Brake System (ABS) Module





Removal and Installation

CAUTION: Electronic modules are sensitive to electrical charges. The anti-lock brake system (ABS) module can be damaged if exposed to these charges.

1. Disconnect the battery ground cable. For additional information, refer to Battery.
2. Remove the air cleaner assembly. For additional information, refer to Fuel Delivery and Air Induction.
3. Disconnect the ABS module electrical connector.
4. Remove the 4 screws and the ABS module.
^ To install, tighten to 3 Nm (27 lb-in) in the sequence shown.





5. To install, reverse the removal procedure.