LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2009 >> E 350 V10-6.8L >> Repair and Diagnosis >> Specifications >> Mechanical Specifications >> Engine >> Cylinder Block Assembly >> Connecting Rod, Engine
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Connecting Rod, Engine

CONNECTING ROD


6.8L (Cylinder Block / Crankshaft / Piston And Connecting Rod / Balance Shaft System):





a The pin bore and crank bearing bore must be parallel and in the same vertical plane within the specified total difference when measured at the ends of a 203 mm bar, 105.5 mm on each side of rod centerline.

ROD BEARING CAP

Tighten the connecting rod bolts in the sequence shown.
Stage 1: Tighten to 43 Nm (32 lb-ft).
Stage 2: Tighten an additional 105 degrees.




scientia non olet · About LEMON Manuals