LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2009 >> Edge Limited, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1488 (Information System & Entertainment System) >> Removal And Installation >> Front Display Interface Module (FDIM) >> Removal and Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal and Installation

WARNING: This page is about a different car, the 2009 Ford Flex. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Module configuration is required when a new Front Display Interface Module (FDIM) is being installed.
  1. Upload the FDIM  configuration information to the scan tool. For additional information, refer to MODULE CONFIGURATION .
  2. Remove the center instrument panel finish panel. For additional information, refer to INSTRUMENT PANEL AND CONSOLE .
    3. NOTE: For vehicles with navigation, make sure not to bend the FDIM  video feed cable when removing the FDIM  .
  3. Remove the 4 screws and the FDIM  .
    • Disconnect the electrical connector.
  4. To install, reverse the removal procedure.
    • Download the configuration information to the FDIM  . For additional information, refer to MODULE CONFIGURATION .
scientia non olet · About LEMON Manuals