Removal And Installation
WARNING: This page is about a different car, the 2009 Mercury Sable, 2009 Ford Taurus X, and 2009 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
If installing a new navigation Audio Control Module (ACM), remove the navigation map DVD, if possible, before sending the ACM to an authorized audio system repair facility.
- Upload the ACM configuration information to the scan tool. For additional information, refer to MODULE CONFIGURATION article.
- Remove the instrument panel center finish panel. For additional information, refer to INSTRUMENT PANEL AND CONSOLE article.
- Remove the 4 screws and the ACM.
- Disconnect the electrical connectors and the antenna lead-in cable.
- To install, reverse the removal procedure.
- Download the configuration information to the ACM. For additional information, refer to MODULE CONFIGURATION article.
NOTE:
Module configuration is only required if a new ACM is being installed.