Trailer Brake Control (TBC) Module: Installation
WARNING: This page is about a different car, the 2009 Ford RV Cutaway, 2009 Ford Econoline, 2009 Ford E450 Super Duty, and 2009 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
- Position the TBC
module into the instrument panel by aligning the plastic rail on top of the module with the 2 tabs on the bracket and install the module.
- Connect the TBC module electrical connector.
- If equipped, install the coin tray/storage bin.
- If equipped with a switch assembly, connect the electrical connector and install the switch assembly.