Removal and Installation

WARNING: This page is about a different car, the 2009 Ford Econoline. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: It is not necessary to remove the Audio Control Module (ACM) to retrieve the part number. For additional information, refer to AUDIO CONTROL MODULE (ACM) SELF-DIAGNOSTIC MODE .

NOTE: Module configuration is required when a new ACM is being installed.

NOTE: Module configuration is not required for the Base AM/FM ACM .

Upload the ACM configuration information to the scan tool. For additional information, refer to MODULE CONFIGURATION article.
Remove the instrument cluster finish panel. For additional information, refer to INSTRUMENT PANEL AND CONSOLE article.
Remove the 4 screws and the ACM .
- Disconnect the electrical connectors and antenna cable(s).
To install, reverse the removal procedure.
- Download the configuration information to the ACM . For additional information, refer to MODULE CONFIGURATION article.