Acceleration Control
WARNING: This page is about a different car, the 2009 Ford RV Cutaway, 2009 Ford Econoline, 2009 Ford E450 Super Duty, and 2009 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
The acceleration control consists of the following:
- Fixed accelerator pedal and position sensor assembly
The throttle is controlled by an Accelerator Pedal Position (APP) sensor on the accelerator pedal assembly. The APP sensor sends a signal to the PCM in response to throttle pedal movement initiated by the driver. The PCM sends a signal to the electronic throttle control which increases and decreases throttle position.
The components in the acceleration control system are not adjustable and new components must be installed if damaged or worn.