Removal And Installation
WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
Vehicles with 5.4L 4V engine
- Remove the battery tray. For additional information, refer to BATTERY, MOUNTING AND CABLES article.
- Disconnect the EGR system module tube-to-EGR system module fitting.
- To install, tighten to 39 Nm (29 lb-ft) (4.0L SOHC).
- To install, tighten to 42 Nm (31 lb-ft) (5.4L 4V).
- Disconnect the EGR system module tube-to-exhaust manifold fitting and remove the tube.
- To install, tighten to 39 Nm (29 lb-ft) (4.0L SOHC).
- To install, tighten to 42 Nm (31 lb-ft) (5.4L 4V).
- To install, reverse the removal procedure.
All vehicles