Ambient Lighting

WARNING: This page is about a different car, the 2009 Ford Flex. However, it is still accessible from the selected car via links, so may be relevant.

The SJB and the LTM (if equipped) set DTCs if certain circuit failures exist with the interior lighting system.

The ambient lighting system consists of the ambient lighting switch, the ambient lighting module, and the harness with hardwired LEDs located within the front and rear footwells, the floor console cup holders, the storage tray and the storage bin. The ambient lighting is powered on when the ignition key is in the RUN or ACCESSORY position. The ambient lighting switch is used to cycle the LEDs through 7 different color combinations or to turn the ambient lighting off. The ambient lighting module provides the necessary voltage to the LEDs to illuminate the cup holders, the storage tray bin and the front and rear footwell areas.