Front Disc Brake System - Exploded View
WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
LH shown, RH similar.
| Item | Part Number | Description |
|---|---|---|
| 1 | - | Brake caliper guide pin bolts (2 required) (part of 2B134, also part of 2001) |
| 2 | 2C357 RH/ 2C358 LH | Brake caliper |
| 3 | 2001 | Brake pads kit |
| 4 | - | Spring clips (4 required) (part of 2001) |
| 5 | W710233 | Brake caliper anchor plate bolts (2 required) |
| 6 | 2B134 | Brake caliper anchor plate |
| 7 | - | Guide pins (part of 2B134) |
| 8 | 1125 | Brake disc |
| 9 | W500020 | Brake disc shield bolts (3 required) |
| 10 | 2K004 | Brake disc shield |
| 11 | W712275 | Brake caliper flow bolt |
| 12 | W712362 | Copper washers (2 required) |
| 13 | - | Brake tube fittings (part of 2C296) |
| 14 | N802191 | Brake flexible hose bracket bolts |
| 15 | 2078 RH/ 2B557 LH | Brake flexible hose |
| 16 | - | Bleeder screw cap (part of 2208) |
| 17 | 2208 | Bleeder screw |
NOTE:
RH shown, LH similar
| Item | Part Number | Description |
|---|---|---|
| 1 | 383609 | Retaining nut |
| 2 | 1125 | Brake disc |
| 3 | 2B220 RH/ 2B221 LH | Brake caliper |
| 4 | W500020 | Brake disc shield bolt (3 required) |
| 5 | 2K004 | Brake disc shield |
| 6 | 2001 | Brake pad (2 required) |
| 7 | - | Brake pad mounting pin (2 required) (part of 2B164) |
| 8 | - | Spring retainer clip (part of 2K583) |
| 9 | N802191 | Brake hose-to-strut bolt |
| 10 | W710233 | Brake caliper bolt (2 required) |
| 11 | - | Brake tube fitting (part of 2C296) |
| 12 | N802191 | Brake flexible hose bracket bolt |
| 13 | 2078 RH/ 2B557 LH | Brake flexible hose |
| 14 | W712362 | Copper washer (2 required) |
| 15 | W712275 | Brake caliper flow bolt |
- For additional information, refer to the procedures.
NOTE:
A revised part, with the same base part number, has been released for the RH brake hose. When installing a new RH brake hose, position the anti-rotation tab on the mounting bracket toward the front of the vehicle and install the bolt with the head toward the rear of the vehicle.