Torque Specifications
WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| A/C clutch disc and hub bolt | 13 | 10 | - |
| A/C pressure relief valve | 10 | - | 89 |
| Compressor bolt (4.0L) | 25 | 18 | - |
| Compressor fitting nuts (4.6L or 5.4L) | 15 | 11 | - |
| Compressor manifold and tube bracket nut | 25 | 18 | - |
| Compressor manifold bolt | 21 | 15 | - |
| Compressor studs (4.6L or 5.4L) | 25 | 18 | - |
| Condenser inlet fitting nut | 8 | - | 71 |
| Condenser outlet fitting nut | 8 | - | 71 |
| Evaporator fitting nuts | 8 | - | 71 |
| Exterior heater core and evaporator core housing nuts | 7 | - | 62 |
| High-pressure Schrader-type valve | 2.5 | - | 22 |
| High-pressure service gauge port valve cap | 0.8 | - | 7 |
| Interior heater core and evaporator core housing nut | 5 | - | 44 |
| LH lower compressor stud (4.0L) | 25 | 18 | - |
| Low-pressure Schrader-type valve | 1.8 | - | 16 |
| Low-pressure service gauge port valve cap | 0.8 | - | 7 |
| Power steering pressure hose bracket bolt | 8 | - | 71 |
| Upper compressor studs (4.0L) | 4 | - | 35 |
| Upper LH compressor nut (4.0L) | 25 | 18 | - |