LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2009 >> Edge SE, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1625 (HVAC Climate Control System) >> Removal And Installation >> Function Selector Switch >> Removal And Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal And Installation

WARNING: This page is about a different car, the 2009 Mercury Grand Marquis and 2009 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the climate control assembly. For additional information, refer to Climate Control Assembly .
  2. Pull and remove the function selector switch knob.
  3. Remove the function selector switch.
    1. Release the tabs.
    2. Remove the function selector switch.
    4. Fig 1: Function Selector Switch
    GF0014394Courtesy of FORD MOTOR CO.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals