LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2009 >> Edge SE, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1625 (HVAC Climate Control System) >> Removal And Installation >> Temperature Control Switch >> Removal And Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal And Installation

WARNING: This page is about a different car, the 2009 Mercury Grand Marquis and 2009 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the climate control assembly. For additional information, refer to Climate Control Assembly .
  2. Pull and remove the temperature control switch knob.
  3. Remove the temperature control switch.
    1. Remove the screw.
    2. Rotate and remove the temperature control switch.
  4. Fig 1: Removing Temperature Control Switch
    GF0014411Courtesy of FORD MOTOR CO.
  5. To install, reverse the removal procedure.