Material Specification

WARNING: This page is about a different car, the 2009 Ford RV Cutaway, 2009 Ford Econoline, 2009 Ford E450 Super Duty, and 2009 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

MATERIAL SPECIFICATION

Item

Specification

Fill Capacity

Additive Friction Modifier XL-3 (US); CXL-3 (Canada)

EST-M2C118-A

0.15L (6 oz) ⁽¹⁾

Motorcraft Hypoid Gear Oil SAE 90 XT-90-GL

ESW-M2C105-A

⁽²⁾

Motorcraft SAE 75W-140 Synthetic Rear Axle Lubricant
XY-75W140-QL (US); CXY-75W140-1L (Canada)

WSL-M2C192-A

⁽³⁾

Motorcraft SAE 80W-90 Premium Rear Axle Lubricant
XY-80W90-QL (US); CXY-80W90-1L (Canada)

WSP-M2C197-A

⁽⁴⁾

Premium Long-Life Grease XG-1-C or XG-1-K (US); CXG-1-C (Canada)

ESA-M1C75-B

Threadlock and Sealer TA-25

WSK-M2G351-A5

Ultra Silicone Sealant TA-29

⁽¹⁾

For a complete refill on Model 60 axles equipped with a limited slip differential, add 0.15L (6 oz) of Additive Friction Modifier XL3 meeting Ford specification EST-M2C118-A to lubricant. Model 70 axles equipped with a limited-slip differential have carbon-fiber clutch discs that do not require any friction modifier.

⁽²⁾	For use in all limited-slip differentials. 2.8L (5.9 pt) in Model 60 axles, 3.1L (6.6 pt) in Model 70-2U axles and 3.9L (8.2 pt) in Model 70TR axles.

⁽³⁾	For conventional 4:10 axles and axles subject to frequent trailer towing, particularly in a hot or hilly area, use Motorcraft SAE 75W- 140 Synthetic Rear Axle Lubricant XY-75W140-QL meeting Ford specification WSP-M2C192-A.

⁽⁴⁾	For use in all conventional axles. 2.8L (5.9 pt) in Model 60 axles, 3.1L (6.6 pt) in Model 70-2U axles and 3.9L (8.2 pt) in Model 70TR axles