Torque Specifications
WARNING: This page is about a different car, the 2009 Ford Econoline. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in | ||
|---|---|---|---|---|---|
| Crossmember-to-rear transmission mount nuts | 95 | 70 | - | ||
| Exhaust downpipe-to-catalytic converter nuts (6.0L diesel engines) | 40 | 30 | - | ||
| Exhaust manifold-to-exhaust Y-pipe nuts(1) | - | - | - | ||
| Exhaust manifold-to-exhaust Y-pipe studs | 40 | 30 | - | ||
| Exhaust system hanger retaining nuts | 30 | 22 | - | ||
| Exhaust system hanger retaining bolt | 25 | 18 | - | ||
| Exhaust Y-pipe-to-catalytic converter nuts | 40 | 30 | - | ||
| Heat shield-to-crossmember bolts | 10 | - | 89 | ||
| LH and RH exhaust manifold-to-turbocharger inlet Y-pipe bolts (6.0L diesel engine) | 27 | 20 | - | ||
| LH turbocharger inlet Y-pipe-to-RH turbocharger inlet Y-pipe nuts (6.0L diesel engine) | 27 | 20 | - | ||
| RH rear lower shock absorber nut | 80 | 59 | - | ||
| RH rear upper shock absorber nut | 40 | 30 | - | ||
| Torca® clamp | 55 | 41 | - | ||
| Transmission crossmember-to-frame nuts | 81 | 60 | - | ||
| Turbocharger inlet Y-pipe-to-EGR cooler clamp (6.0L diesel engine) | 6 | - | 53 | ||
| Turbocharger-to-exhaust downpipe clamp (6.0L diesel engine) | 9 | - | 80 | ||
| Turbocharger-to-turbocharger inlet Y-pipe clamp (6.0L diesel engine) | 12 | - | 106 | ||
|
|||||