Powertrain Control Module (PCM): Removal
WARNING: This page is about a different car, the 2010 Lincoln MKX and 2010 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
- Retrieve the module configuration. Carry out the module configuration retrieval steps of the Programmable Module Installation (PMI) procedure. For additional information, refer to MODULE CONFIGURATION .
- Disconnect the 3 PCM electrical connectors.
- Remove the 2 nuts and the PCM.
- Remove the gasket.
NOTE:
PCM replacement DOES NOT require new keys or programming of keys.