LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2009 >> Escape Base, 2.5 7, AWD, Automatic >> Repair and Diagnosis (Single Page) >> Electrical >> Gauges >> Information System & Entertainment System >> Removal And Installation >> Front Display Interface Module (FDIM) >> Removal and Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal and Installation

    NOTE: Module configuration is only required if a new Front Display Interface Module (FDIM) is being installed.
  1. Upload the FDIM configuration information to the scan tool. For additional information, refer to Programmable Module Installation (PMI) in MODULE CONFIGURATION .
  2. Remove the instrument panel upper finish panel by pulling straight back.
  3. Remove the 4 FDIM screws.
  4. Remove the FDIM.
    • Disconnect the electrical connector.
  5. To install, reverse the removal procedure.
    • Download the configuration information to the FDIM. For additional information, refer to PMI in MODULE CONFIGURATION .
scientia non olet · About LEMON Manuals