Component testing procedure - Moonroof switch
COMPONENT TESTING PROCEDURE - MOONROOF SWITCH
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Tilt | 12 and 3 | Tilt Open (push) | Closed circuit |
| Open | 12 and 6 | Slide Open (push) | Closed circuit |
| Close | 12 and 8 | Tilt Close (pull) | Closed circuit |
| 12 and 8 | Slide Close (pull) | Closed circuit |