October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Removal and Installation

Remove the RH C-pillar trim panel. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION .
Disconnect the Fuel Pump (FP) module electrical connector.
Release the wire harness retainer clip.

NOTE: Do not overtighten the fasteners or damage to the module will occur.

Remove the 2 FP control module nuts.
- To install, tighten to 5 Nm (44 lb-in).
To install, reverse the removal procedure.