Component testing procedure
COMPONENT TESTING PROCEDURE
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Off circuit | 4 and 1 | Off | Closed circuit |
| Park | Open circuit | ||
| Lo Beam | Open circuit | ||
| Lo beam circuit | 8 and 1 | Off | Open circuit |
| Park | Open circuit | ||
| Lo Beam | Closed circuit | ||
| Park circuit | 3 and 1 | Off | Open circuit |
| Park | Closed circuit | ||
| Lo Beam | Open circuit | ||
| Fog circuit | 6 and 1 | Off | Open circuit |
| Fog | Closed circuit |