Component testing procedure
WARNING: This page is about a different car, the 2009 Lincoln Navigator L, 2009 Lincoln Navigator, 2009 Ford Expedition EL, and 2009 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.
ROOF OPENING PANEL SWITCH - COMPONENT TESTING
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Tilt Open | 12 and 6 | Open (push) | Closed circuit |
| 12 and 8 | Open (push) | Open circuit | |
| 12 and 3 | Open (push) | Closed circuit | |
| Tilt Close | 12 and 8 | Close (pull) | Closed circuit |
| 12 and 6 | Close (pull) | Open circuit | |
| 12 and 3 | Close (pull) | Closed circuit | |
| Slide Open | 12 and 6 | Open (push) | Closed circuit |
| 12 and 8 | Open (push) | Open circuit | |
| Slide Close | 12 and 8 | Close (pull) | Closed circuit |
| 12 and 6 | Close (pull) | Open circuit | |
| Vent Open | 12 and 4 | Open (push) | Closed circuit |
| 12 and 9 | Open (push) | Open circuit | |
| Vent Close | 12 and 9 | Close (pull) | Closed circuit |
| 12 and 4 | Close (pull) | Open circuit |