HS-CAN Network Operation
WARNING: This page is about a different car, the 2008 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
The HS-CAN network communicates using bussed messages. The HS-CAN network uses an unshielded twisted pair cable, data bus (+) and data bus (-) circuits. In addition to scan tool communication, this network allows sharing of information between all modules on the network.
The HS-CAN is a high speed communication network used for the following modules:
- PCM
- RCM
- SJB
- 4X4 control module (if equipped)
- Occupant classification system module (OCSM)
- Instrument cluster (IC)