Inspection and Verification

WARNING: This page is about a different car, the 2008 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.

This service information provides step-by-step module configuration procedures. Carry out the PMI procedures in this service information when another article directs to carry out configuration or when DTCs from the below list are present:

DTC CHART

DTC	Description	Source	Action
B2477	Module Configuration Failure	Instrument cluster (IC) Restraints control module (RCM) Smart junction box (SJB)	CARRY OUT PMI. REFER to Programmable Module Installation .
P0602	Powertrain Control Module Programming Error	PCM	CARRY OUT PMI. REFER to Programmable Module Installation .
P0605	Internal Control Module Read Only Memory (ROM) Error	PCM	CARRY OUT PMI. REFER to Programmable Module Installation .
P1639	Vehicle ID Block Corrupted, Not Programmed	PCM	CARRY OUT PMI. REFER to Programmable Module Installation .
U0300	Internal Control Module Software Incompatibility	PCM	CARRY OUT PMI. REFER to Programmable Module Installation .
U0301	Software Incompatibility with Engine/Powertrain Control Module	PCM	CARRY OUT PMI. REFER to Programmable Module Installation .
U2050	No Application Present	Instrument cluster (IC) Occupant classification system module (OCSM) RCM SJB 4X4 control module	CARRY OUT PMI. REFER to Programmable Module Installation .
U2051	One or More Calibration Files Missing/Corrupt	OCSM RCM	CARRY OUT PMI. REFER to Programmable Module Installation .