Removal And Installation

Wagon 

1. Remove the 2 screws and the steering wheel controls bezel.
2. Remove the 2 screws and the speed control switch.
   • Disconnect the electrical connector.
   • To install, tighten to 7 Nm (62 lb-in).

Sedan 

3. Remove the driver air bag module. For additional information, refer to SUPPLEMENTAL RESTRAINT SYSTEM article.
4. Remove the 2 screws and the speed control switch.
   • Disconnect the electrical connector.
   • To install, tighten to 7 Nm (62 lb-in).

All vehicles 

5. To install, reverse the removal procedure.