Upper Intake Manifold: Notes

WARNING: This page is about a different car, the 2008 Mercury Sable, 2008 Ford Taurus X, and 2008 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Early build shown, late build similar.

Fig 1: Upper Intake Manifold Components With Torque Specifications (1 Of 2)

Courtesy of FORD MOTOR CO.

Item	Part Number	Description
1	-	Evaporative emissions (EVAP) tube-to-upper intake manifold pin-type retainer
2	W503274	Upper intake manifold long support bracket bolt (early build engines)
3	14A464	Heated PCV electrical connector (part of 12C508) (early build engines)
4	6K817	PCV hose
5	14A464	Throttle body (TB) electrical connector (part of 12C508)
6	CS16140	Brake booster-to-intake manifold vacuum hose clamp
7	6K817	Brake booster-to-intake manifold vacuum hose
8	9D661	EVAP-to-intake manifold tube
9	W503274	Upper intake manifold short support bracket bolt
10	-	Engine control wiring harness retainer (part of 12C508)

Fig 2: Upper Intake Manifold Components With Torque Specification (2 Of 2)

Courtesy of FORD MOTOR CO.

Item	Part Number	Description
11	-	Fuel tube bracket bolt
12	W503282	Upper intake manifold bolt (5 required)
13	W707083	Upper intake manifold bolt
14	9S455	Upper intake manifold
15	9H486	Upper intake manifold gasket (3 required)