Output State Control Procedures: Notes
WARNING: This page is about a different car, the 2009 Mercury Grand Marquis and 2009 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
Retrieve the continuous codes, carry out a Key ON Engine OFF (KOEO) and Key ON Engine Running (KOER) on-demand self test before using output state control. Any DTCs related to the Transmission Range (TR) sensor or the Output Shaft Speed (OSS) sensor must be fixed or the PCM will not allow output state control to operate.
Using the scan tool, output state control has 2 menus for operation, the Bench Mode and the Drive Mode.