Output State Control - Drive Mode
WARNING: This page is about a different car, the 2009 Mercury Grand Marquis and 2009 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
The Drive Mode allows control of 2 transmission functions. Each output state control function has a unique set of vehicle operating requirements that the technician is required to meet before being allowed to operate output state control. The recommended procedure, when using the Drive Mode, is to command one parameter at a time. The Drive Mode allows the technician to control the following output state control functions on the transmission:
- GEAR_OSC - Directs the PCM to up-shift or down-shift
- TCC# - Directs the PCM to lock or unlock the TCC