LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2009 >> Taurus SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 1400 (Cruise Control System - Speed Control) >> Removal And Installation >> Speed Control DEACTIVATOR Switch >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Speed Control DEACTIVATOR Switch: Installation

WARNING: This page is about a different car, the 2009 Mercury Grand Marquis and 2009 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: The speed control deactivator switch is self-adjusting. Do not pull up or push-down on the brake pedal during installation. The switch will only self-adjust one time and allows for only the initial installation. If further adjustment becomes necessary, a new switch must be used.
  1. Install the speed control deactivator switch, and rotate clockwise 45 degrees.
  2. Connect the speed control deactivator switch electrical connector.
scientia non olet · About LEMON Manuals