Dual Automatic Temperature Control (DATC) System

The DATC  system maintains the selected vehicle interior temperature by heating and/or cooling the air.

• During A/C operation the system also reduces the relative humidity of the air.
• The driver may override the automatic mode of operation.
• The temperature control setting determines the desired air temperature.
• The blower motor control override buttons vary the blower motor speed.
• The driver side and passenger side temperature settings can be individually controlled.

The DATC  system operation is determined by the settings on the HVAC module - DATC  module. The DATC  system automatically maintains a selected temperature for vehicle interior comfort. The DATC  system is composed of the DATC  module, blower motor speed control, mode door actuator, air inlet door actuator, temperature blend door actuator, in-vehicle temperature sensor, ambient temperature sensor, evaporator temperature sensor and solar radiation sensor to control the various functions.

When the HVAC module - DATC  module is set to AUTO:

• the air distribution direction, blower motor speed and A/C compressor operation are automatically controlled based on the temperature(s) selected.

The HVAC module - DATC  module manual override settings:

• allow the air distribution direction to be manually selected.
• allow the blower motor speed to be manually selected.
• allow recirculation mode to be manually selected in all modes except DEFROST. The A/C request can be cancelled by pressing the A/C request switch, turning the indicator OFF.
• allow A/C compressor operation to be manually selected except in DEFROST.

The HVAC module - DATC  module also includes:

• a rear window DEFROST button. Refer to GLASS, FRAMES AND MECHANISMS .
• heated seat controls. Refer to SEATING .