Auto-Unlock Programming Using the Keyless Entry Keypad Procedure (If Equipped)
NOTE:
The auto-unlock feature is not available on vehicles equipped with a manual transmission.
- Turn the ignition to the OFF position.
- Close all the doors, the liftgate and the liftgate glass.
- Enter the 5-digit permanent entry code on the keyless entry keypad.
- Within 5 seconds of entering the code, press and hold the 3/4 button on the keypad. While holding the 3/4 button, press and release the 7/8 button twice.
- Release the 3/4 button. The horn will chirp once to indicate auto-unlock is disabled. If the horn chirps twice (chirp followed by a honk), the auto-unlock feature has been enabled.