DTC P2627: O2 Sensor Pumping Current Trim Circuit Low Bank 1, Sensor 1
DTC P2627: O2 SENSOR PUMPING CURRENT TRIM CIRCUIT LOW BANK 1, SENSOR 1
| Description: | A resistor is installed in the universal heated oxygen sensor (HO2S) connector for part to part variance. The powertrain control module (PCM) determines the value of this resistor by taking multiple measurements of the resistor during each key on event. The PCM uses this value in order to compensate for the variance in the pumping current signal. The test fails if the PCM determines the resistance value is too high. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST DZ . | ||