DTC P0605: Internal Control Module Read Only Memory (ROM) Error

DTC P0605: INTERNAL CONTROL MODULE READ ONLY MEMORY (ROM) ERROR

Description:	The powertrain control module (PCM) ROM has been corrupted.
Possible Causes:	An attempt was made to change the calibration Module programming error Aftermarket performance products PCM
Diagnostic Aids:	Reprogram the vehicle identification (VID) block (use as built data). Check for other DTCs or drive symptoms for further action. Make sure to check for aftermarket performance products before installing a new powertrain control module (PCM). If it is necessary to install a new PCM, refer to FLASH ELECTRICALLY ERASABLE PROGRAMMABLE READ ONLY MEMORY (EEPROM) , Programming the (VID) Block for a Replacement PCM.
Application	Key On Engine Off	Key On Engine Running	Continuous Memory
All	Refer to the Description, Possible Causes and Diagnostic Aids for the appropriate DTC.