LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2010 >> Expedition RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1510 (Engine Controls - Electronic Engine Controls) >> Removal And Installation >> Powertrain Control Module (PCM) >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Powertrain Control Module (PCM): Removal

WARNING: This page is about a different car, the 2010 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
  1. NOTE: PCM installation DOES NOT require new keys or programming of keys, only a Parameter Reset of the Passive Anti-Theft System (PATS).

    Retrieve the module configuration. Carry out the module configuration retrieval steps of the Programmable Module Installation (PMI) procedure. For additional information, refer to MODULE CONFIGURATION .

  2. Remove the Air Cleaner (ACL) outlet pipe and the ACL assembly. For additional information, refer to INTAKE AIR DISTRIBUTION & FILTERING .
  3. Disconnect the 3 PCM electrical connectors.
  4. Remove the 2 bolts and the PCM.
scientia non olet · About LEMON Manuals