Autolock Programming Using the Keyless Entry Keypad

1. Close all doors and windows.
2. Confirm that the ignition key is OFF.
3. Enter the 5-digit permanent entry code into the keyless entry keypad.
4. Within 5 seconds of entering the code, press and hold the 3/4 button on the keyless entry keypad.
5. Within 5 seconds of Step 3, and while holding the 3/4 button, press the 7/8 button on the keyless entry keypad and release it.
6. NOTE: If the autolock is disabled, the horn chirps once. If the autolock feature is enabled, the horn chirps once shortly and then sounds a second time with a longer sound of the horn once the above sequence is completed.

Within 5 seconds of Step 3, release the 3/4 button on the keyless entry keypad.