Powertrain Control Module (PCM): Removal
WARNING: This page is about a different car, the 2009 Mercury Mountaineer, 2009 Ford Explorer Sport Trac, and 2009 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
All vehicles
- Retrieve the module configuration. Carry out the module configuration retrieval steps of the Programmable Module Installation procedure. For additional information, refer to MODULE CONFIGURATION article.
- Remove the air cleaner. For additional information, refer to INTAKE AIR DISTRIBUTION AND FILTERING article.
- Disconnect the RH front wheel speed sensor electrical connector. Remove the nut(s) and position the A/C tube bracket(s) and wiring harness aside.
- Disconnect the PCM connectors.
- Remove the bolts and the PCM.
NOTE:
PCM installation DOES NOT require new keys.
Vehicles equipped with a 4.6L (3V) engine
All vehicles