LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2010 >> Explorer 4.6 8, AWD >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Handles, Locks, Latches And Entry Systems >> General Procedures >> Autolock and Auto-Unlock Programming >> Auto-Unlock Programming Using the Keyless Entry Keypad
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Auto-Unlock Programming Using the Keyless Entry Keypad

  1. Close all doors and windows.
  2. Confirm that the ignition key is OFF.
  3. Enter the 5-digit permanent entry code into the keyless entry keypad.
  4. Within 5 seconds of entering the code, press and hold the 3/4 button on the keyless entry keypad.
  5. Within 5 seconds of Step 3, and while holding the 3/4 button, press the 7/8 button twice on the keyless entry keypad and release it.
  6. NOTE: If the auto-unlock is disabled, the horn chirps once. If the auto-unlock feature is enabled, the horn chirps twice.

    Within 5 seconds of Step 3, release the 3/4 button on the keyless entry keypad.

scientia non olet · About LEMON Manuals