October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Intake Manifold

Install the 10 intake manifold bolts and tighten the bolts in the sequence shown in 2 stages.
Stage 1: Tighten finger-tight.
Stage 2: Tighten to 10 Nm (89 lb-in).
Stage 3: Tighten an additional 60 degrees.
Stage 4: Loosen all 10 bolts a minimum of 1 full turn (360 degrees).
Stage 5: Tighten to 10 Nm (89 lb-in).
Stage 6: Tighten an additional 60 degrees.