LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2010 >> Fusion S, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 17 (Engine Controls - Electronic Engine Controls - 3.5L) >> Removal And Installation >> Powertrain Control Module (PCM) >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Powertrain Control Module (PCM): Removal

WARNING: This page is about a different variant/trim than selected.
  1. Retrieve the module configuration. Carry out the module configuration retrieval steps of the Programmable Module Installation (PMI) procedure. For additional information, refer to PROGRAMMABLE MODULE INSTALLATION (PMI) .
    NOTE: PCM replacement DOES NOT require new keys or programming of keys.
  2. Remove the battery tray. For additional information, refer to REMOVAL AND INSTALLATION .
  3. Disconnect the 2 PCM electrical connectors.
  4. Remove the 4 bolts and the PCM.
scientia non olet · About LEMON Manuals