LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2010 >> Mustang Base, 2D Convertible, Automatic >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Fuel Charging System & Fuel Control System - 4.0L SOHC >> Removal And Installation >> Fuel Pump Driver Module (FPDM) >> Removal and Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal and Installation

NOTE: The Fuel Pump Driver Module (FPDM) is located in the spare tire stowage compartment.
  1. Disconnect the FPDM  electrical connector.
  2. Remove the 2 bolts and the FPDM  .
    • To install, tighten to 10 Nm (89 lb-in).
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals