Body Control Module B (BCM-B) DTC Chart

DTC	Description	Action
B109F:08	Intrusion Sensor Module: Bus Signal/Message Failures	GO to PINPOINT TEST E .
B109F:49	Intrusion Sensor Module: Internal Electronic Failure	INSTALL a new intrusion/inclination sensor. REFER to INTRUSION AND INCLINATION SENSOR . TEST the system for normal operation.
B109F:55	Intrusion Sensor Module: Not Configured	REFER to MODULE CONFIGURATION .
B109F:97	Intrusion Sensor Module: Component Or System Operation Obstructed Or Blocked	NOTE: The Body Control Module B (BCM-B) DTC B109F:97 is a continuous memory and on-demand DTC that sets when there are 3 successive failures of the intrusion/inclination sensor module to arm and there is no indication of a module fault and the communication link between the module and the BCM-B appears to have sufficient integrity. CHECK for any blockages/restrictions near the intrusion/inclination sensor that may hinder/affect the operation of the sensor.
U0140:87	Lost Communication With Body Control Module: Missing Message	REFER to MULTIFUNCTION ELECTRONIC MODULES to diagnose the BCM-B .
U0155:87	Lost Communication With Instrument Panel Cluster (IPC ) Control Module: Missing Message	REFER to MULTIFUNCTION ELECTRONIC MODULES to diagnose the BCM-B .
U0422:68	Invalid Data Received From Body Control Module: Event Information	REFER to MULTIFUNCTION ELECTRONIC MODULES to diagnose the BCM-B .
U0423:68	Invalid Data Received from Instrument Panel Cluster Control Module: Event Information	REFER to MULTIFUNCTION ELECTRONIC MODULES to diagnose the BCM-B .
All other DTCs	-	REFER to the DIAGNOSTIC TROUBLE CODE (DTC) CHART .